Nortel Networks Modular ICS 4.0 User Manual
Page 108
96 / Communicating in the office
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
Activating and deactivating the ability to page
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
≠ and enter the internal number of the
telephone you want to program.
4. Press
≠ twice.
5. Press
‘ seven times. The display reads Paging.
6. Press CHANGE to select the setting: Y (Yes) or N (No).
Creating page zones
Each telephone can be assigned to one of six zones for
receiving pages.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
≠ and enter the internal number of the
telephone you want to program.
Tip -
Hunt Group DNs cannot be included in a page zone.
For more information on Hunt Groups see “Programming
Hunt Groups” on page 135.
p0881591.book Page 96 Wednesday, August 19, 1998 6:43 PM