Nortel Networks Modular ICS 4.0 - Manual (Page 143)

User Preferences / 131
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
7. Press
‘ and choose the line (or enter a code for a
line pool) the speed dial code should use.
Use the line pool code to select a particular line pool for use
with Speed Dial. If you select Use routing tbl, a line or pool
is chosen by the routing programming according to the initial
digits in the number.
The route you choose for a User Speed Dial code must be one
that the telephone can use. For example, if the telephone does
not have access to Line Pool B and you use that pool code with
the speed dial code, the code does not work.
To change a system speed dial code, see “Adding or changing
a system speed dial” on page 17.
Changing Call Log options
1. Press
≠ at Call log opt’ns….
2. Press CHANGE until you see the option you want to use. See
“Call Log options” on page 108.
Changing how calls are dialed
1. Press
≠ at Dialing opt’ns….
2. Press CHANGE until you see the option you want to use.
Descriptions for dialing options are found on the Telephone
Feature Card , or see “Changing how you dial your calls” on
page 57.
Changing the language used on the display
Press CHANGE at Language: until you see the language you
want to use. See “Changing the language on the display” on
page 116.
p0881591.book Page 131 Wednesday, August 19, 1998 6:43 PM