Nortel Networks Modular ICS 4.0 - Manual (Page 78)

66 / Time savers for making calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Preventing a telephone from using Last Number
Redial
Last Number Redial can be restricted at individual telephones.
You need the programming template found at the front of this
guide. See “A map for working in programming” on page 7 for
more information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
≠ and enter the internal number of the
telephone you want to program.
4. Press
≠.
5. Press
‘ three times. The display shows
Restrictions.
6. Press
≠ twice.
7. Press
‘. The display shows Allow last no:.
8. Press CHANGE to choose Y (Yes) or N (No).
Displays
The last number you dialed was a speed dial
number that displayed a name rather than
the number. The number is dialed correctly,
but you cannot see it.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Tip -
You can copy a number onto an autodial button
using Last Number Redial.
Hidden number
No last number
p0881591.book Page 66 Wednesday, August 19, 1998 6:43 PM