Nortel Networks Modular ICS 4.0 - Manual (Page 194)

182 / Using System features
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
You can program more than one pause in an external autodial
or speed dial sequence.
The Pause symbol (›) uses one of the 24 spaces in a dialing
sequence.
For pulse dialing,
• inserts a 1.5 second pause into the
dialing sequence.
Long Tones
ƒ°‚°
The Long Tones feature allows you to control the length of a
tone so that you can signal devices such as fax or answering
machines which require tones longer than the standard 120
milliseconds.
1. While on a call, press
ƒ°‚°.
2. Press the dial pad buttons to produce the appropriate tones.
Each tone sounds for as long as you hold down the button.
Long tones can be used on any call except a conference call.
You can use internal lines of the Norstar system to activate a
device connected to an analog terminal adapter (ATA) in
another area of your office, or external lines to access devices
outside the Norstar system.
Displays
At the appropriate time, press any dial pad
button. Hold each button down for as long as
necessary. Press
ƒ or ˙
to cancel Long Tones.
Long Tones:
p0881591.book Page 182 Wednesday, August 19, 1998 6:43 PM