Nortel Networks Modular ICS 4.0 - Manual (Page 79)

Time savers for making calls / 67
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Using Speed Dial
Norstar provides two types of speed dialing: system and
personal. System Speed Dial programming allows you to
assign two-digit speed dial codes to the external numbers your
co-workers call most frequently. Personal or User Speed Dial
programming allows individuals to program their own speed
dial numbers.
Speed dial numbers are subject to the same restriction filters as
regularly dialed numbers. Your installer or customer service
representative can program system speed dial numbers to
bypass dialing restrictions.
Speed dial numbers may include host system signaling codes.
Making a speed dial call
ƒ‚
1. Press
ƒ‚ to quickly dial external telephone
numbers that have been programmed onto speed dial
codes.
2. Enter the appropriate two-digit speed dial code.
Changing and adding System Speed Dials
System Speed Dial codes are numbered from 01 to 70. The
system coordinator assigns numbers to System Speed Dial
codes for the entire system. See “Adding or changing a system
speed dial” on page 17.
Tip -
There is no difference between using User Speed
Dial and using System Speed Dial. They differ only in how
you program them.
p0881591.book Page 67 Wednesday, August 19, 1998 6:43 PM