Nortel Networks Modular ICS 4.0 - Manual (Page 184)

172 / Using System features
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
If you forget the administration or basic passwords, you
cannot do any programming. Call your customer service
representative to assign a new password.
The password is a one to six-digit number. It is advised to
make your password at least six digits long for security
reasons. If you press CHANGE but do not enter a new password,
the existing password is erased. Anyone can then access
programming without a password.
The default System Coordinator password is
ÅΘȈ,
which is the same as
¤‹fl›fl.
One password cannot be a subset of another one. For example,
you cannot have 123 and 12345.
Using a Basic password
In addition to a System Coordinator password, there is a Basic
password. This allows you to delegate some of the duties of
being a system coordinator to someone else without allowing
access to sensitive programming.
The default Basic password is
ıÅÍÈÇ or
¤¤‡›¤.
You can enter the Basic password after the following feature
codes:
•
ƒ•• ЛН‰В (User Preferences)
•
ƒ ••ÊȘ‰ (to change the system
time and date)
p0881591.book Page 172 Wednesday, August 19, 1998 6:43 PM