Nortel Networks Modular ICS 4.0 - Manual (Page 129)

Customizing your telephone / 117
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Programming feature buttons
ƒ•‹
Any memory button not programmed as an external or internal
line, target line, Answer button, or Handsfree/Mute button, is
available for features.
1. Press
ƒ•‹.
2. Press the memory button you want to program with a
feature.
3. Enter the appropriate feature code you want to assign onto
the button.
The following feature codes cannot be programmed onto a
memory button: Long Tones and any code beginning with
•
except
ƒ•fi‚⁄ (Language Choice) and
ƒ•‡ (Contrast Adjustment).
Erasing a feature button
1. Press
ƒ•⁄.
2. Press the feature button.
3. Press
˙ or OK to erase the button.
Displays
Tip -
When you program a button with the line pool
feature code, you must enter a line pool access code after
the feature code. The programmed line pool button
accesses a specific line pool, not the line pool feature.
The name of the feature assigned to a button
is displayed when you press the button.
SHOW
appears when there is more information
available. Press
£ or SHOW for additional
information.
<Feature name>
SHOW OK
p0881591.book Page 117 Wednesday, August 19, 1998 6:43 PM