Nortel Networks Modular ICS 4.0 - Manual (Page 123)

Tracking your incoming calls / 111
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
6. Lift the receiver. (This is not necessary if Handsfree is
programmed at your telephone.) The displayed number is
dialed.
Creating a password to your Call Log
ƒ•°fi
To access your Call Log through a password:
1. Press
ƒ•°fi. The displays reads
New passwrd:.
2. Enter your four-digit password. The display reads
Repeat New:.
3. Re-enter your four-digit password. The display reads
Password changed, which confirms that your password
has been assigned.
To enter Call Log using your password:
1. Press
ƒ°⁄¤ to enter Call Log. If you have
programmed a password, the display reads Password:.
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in
programming. See “Using passwords” on page 171.
Changing your Call Log password
ƒ•°fi
1. Press
ƒ•°fi. The display reads
Old passwrd:.
2. Enter your old password. The display reads
New passwrd:.
3. Enter your new four-digit password. The display reads
Repeat New:.
p0881591.book Page 111 Wednesday, August 19, 1998 6:43 PM