Nortel Networks Modular ICS 4.0 - Manual (Page 115)

Communicating in the office / 103
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
The system no longer provides either a Stuttered Dial Tone or
a Message Waiting Lamp if there are no messages pending.
Viewing messages you have sent
ƒ⁄
On a telephone with a two-line display, you can view the
messages you have sent.
1. Press
ƒ⁄.
2. Press SHOW to display your first sent message.
3. Press NEXT to move through your sent messages.
Displays
You have entered an invalid number when
attempting to cancel a message.
You have cleared an external message from
your message waiting list. The message
itself exists in your voice message center
until you erase it there.
You are trying to call from your message
waiting list. The line that you are trying to use
is being used by the identified Norstar user.
You are viewing your message list. The
display shows the number and name of the
line that was used for your voice mail
message.
You have tried to send a message to an
invalid internal number or to a telephone that
is out of service.
SHOW appears only if you have outstanding
messages. Press SHOW to review messages
you have sent. Press ADD to send a new
message.
Enter the internal number of the telephone to
which you want to send a message.
Cancel denied
Cleared>LINENAM
NEXT
In use: 221
L001:LINENAMVMsg
NEXT
CALL CLEAR
Message denied
Message list
SHOW
ADD EXIT
Message to:
p0881591.book Page 103 Wednesday, August 19, 1998 6:43 PM