Nortel Networks Modular ICS 4.0 - Manual (Page 91)

Transferring calls / 79
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Parking a call
ƒ‡›
You can suspend a call so that it can be retrieved from any
telephone in your system.
1. Press
ƒ‡›.
The person to whom you redirected a call
has Do Not Disturb active on the telephone.
The call has come back to you. Press the
CALLBACK button or the line button to
reconnect to the call. On the M7100
telephone, just pick up the receiver.
You have tried to camp an internal call. You
can only camp external calls.
Dial the number of the internal telephone to
which the call is sent.
The telephone to which you camped a call
did not answer the call. The call has come
back to you. Press
CALLBACK or the line
button to reconnect to the call. On the M7100
telephone, just pick up the receiver.
A call you camped has come back to you, but
the caller hung up before you could
reconnect.
The telephone to which you have camped a
call is out of service or is being used for
programming. The call has come back to
you. Press
CALLBACK or the line button to
reconnect to the call. On the M7100
telephone, just pick up the receiver.
The line that the camped call is on is in use
or that line does not appear at your
telephone. Release the line or release an
internal line.
For other displays, see “Common feature displays” on page 203.
221 DND
CALLBACK
Camp denied
Camp to:
CANCL
Camped: 221
CALLBACK
Line001 hung up
Not in service
CALLBACK
Release a call
p0881591.book Page 79 Wednesday, August 19, 1998 6:43 PM