Nortel Networks Modular ICS 4.0 - Manual (Page 185)

Using System features / 173
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Because the Basic password can be used to change the time,
you should give it out with care and change it when necessary
(for example, when an employee leaves the company). If
restrictions, routing or other services operate on a schedule,
changing the time can allow someone to bypass the
programming.
Registration password
The Registration password is used to control the registration of
Companion portables to the Norstar system. See the MICS-XC
Norstar-Companion System Coordinator Guide for more
information.
Changing passwords
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
‘ four times.
4. Press
≠ at Passwords.
5. Press
‘ until you see Progrming pswds ˆ.
6. Press
≠.
7. Press
‘ until you see the name of the password
you want to change.
8. Use
≠, CHANGE and the dial pad to enter the new
password. Press OK to accept the new password.
You cannot erase or eliminate the ability to program
passwords.
p0881591.book Page 173 Wednesday, August 19, 1998 6:43 PM