Nortel Networks Modular ICS 4.0 - Manual (Page 44)

32 / Answering calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
A CAP module is an add-on device that provides 48 extra
memory or line buttons. You can connect one or two Norstar
CAP modules to the telephone to increase the number of lines
it can handle.
When a CAP module is first plugged into your telephone,
some of the module buttons are already programmed to dial an
internal number.
Customizing your CAP module
If your installer has programmed the CAP module to be the
central answering position for your system, you can move
external lines onto the CAP module by using
ƒ•°⁄. See “Moving line buttons” on page 124.
Any of the buttons on your CAP module that do not select lines
can be programmed to dial internal or external numbers
automatically. You can program features onto CAP module
buttons. See “Time savers for making calls” on page 63 and
“Customizing your telephone” on page 115 for information on
programming memory buttons.
Buttons on a CAP module cannot be assigned as answer
buttons.
M7324 telephone
CAP module
p0881591.book Page 32 Wednesday, August 19, 1998 6:43 PM