Nortel Networks Modular ICS 4.0 - Manual (Page 65)

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Making calls
There are many ways to make a call, depending on the
programming and the type of call, as follows:
• Pick up the receiver and dial. The Norstar system supports
three methods of dialing. See “Changing how you dial
your calls” on page 57.
• Pick up the receiver, press a line button, and dial (if the call
is not on your prime line).
• Press
© and dial (to talk without using the
receiver). See “Using Handsfree/Mute” on page 45.
• Press
©, press a line button, and dial (to talk
without the receiver and if the call is not on your prime
line).
• Press a line button and dial (to talk without the receiver and
if Automatic Handsfree is assigned to your telephone).
• Use one of the features that make dialing easier. See “Time
savers for making calls” on page 63.
Displays
The telephone you have called has no
internal lines available. Press
LATER to use
the Ring Again or Message features or press
PRIORITY to make a priority call.
You are dialing using Pre-dial. To erase an
incorrect digit, press the left end of
√ or BKSP . When the number is
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
TRANSFER .
221 busy
PRIORITY
LATER
9__
QUIT
BKSP
95551234
TRANSFER
p0881591.book Page 53 Wednesday, August 19, 1998 6:43 PM