Nortel Networks Modular ICS 4.0 - Manual (Page 137)

Customizing your telephone / 125
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Changing the type of ring
ĥfl
You can choose one of four distinctive rings for your
telephone. This makes it easier to identify your telephone in an
open office.
1. Press
ĥfl.
2. Press
⁄, ¤, ‹, ›, or NEXT. You hear the selected
ring for two seconds.
3. Repeat until you hear the ring you prefer, then press
˙ or OK.
Adjusting the Ring volume
ƒ•°‚
1. Press
ƒ•°‚. The telephone rings.
2. Press
√ to adjust the volume; left end for lower
and right end for higher.
Hiding the message or calls indication
ƒ°‚fl
The display that shows you have messages or calls can be
replaced with the current time and date. You can retrieve your
message and call information by using the display buttons that
appear on the second line of the display.
Press the button you want to move the line
to. Neither of the buttons is erased. The
lines, or the line and feature, simply switch
places.
The button you are trying to move is not a
line button. If you are trying to switch a line
and a feature, move the line to the feature
button and not the feature button to the line.
Move line to:
QUIT
Press a line
p0881591.book Page 125 Wednesday, August 19, 1998 6:43 PM