Nortel Networks Modular ICS 4.0 - Manual (Page 77)

Time savers for making calls / 65
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Using Last Number Redial
ƒfi
Press
ƒfi to redial the last external number you
dialed.
Last Number Redial records a maximum of 24 digits.
You are programming an internal autodial
button and have entered a number that is not
an internal number on your system. Enter a
valid internal number. If the number you are
entering is a destination code, use external
autodial.
Press the memory button you want to
program.
Enter the number you want to program onto
the button, then press
˙ .
Enter the number you want to program onto
the button, then press
˙ or OK . You
may include a line or line pool selection in an
autodial sequence by selecting the line
before entering any digits.
The number is stored on the button.
For other displays, see “Common feature displays” on page 203.
Tip -
If you have a programmed Last Number Redial
button, you can use Button Inquiry ( ƒ•‚ ), then
press the Last Number Redial button followed by £ ) to
check the last number before you dial it.
Invalid number
Press a button
QUIT
Program and HOLD
Program and OK
QUIT
OK
Programmed
p0881591.book Page 65 Wednesday, August 19, 1998 6:43 PM