Nortel Networks Modular ICS 4.0 - Manual (Page 127)

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Customizing your telephone
Finding out what a button does using Button Inquiry
ƒ•‚
You can check the function of any line, intercom, or
programmed button on your Norstar telephone by pressing
ƒ•‚. On the M7100 telephone Button Inquiry
shows your internal number followed by the function assigned
to your single memory button.
Displays
Making the display darker or lighter using Contrast
adjustment
ƒ•‡
1. Press
ƒ•‡.
The display shows the number and name of
the line. Press
SHOW to view the redirection
status of the line.
Press £ or press VIEW‚ or ·VIEW t o view a
number that is too long to fit on the display.
Press
˙ or OK when you are done.
The display shows the directory number of
the telephone, and the assigned name.
Press
NEXT to see the first line assigned to
ring at the intercom button.
The name of the feature assigned to a button
is displayed when you press the button.
Press
£ or SHOW for additional information.
Press the button you want to check. Press
ƒ or EXIT when you are finished.
For other displays, see “Common feature displays” on page 203.
001 <LINENAME>
SHOW OK
123456789012345...
VIEW‚ OK
221 <SETNAME>
NEXT VIEW‚
<Feature name>
SHOW OK
Press a button
EXIT
p0881591.book Page 115 Wednesday, August 19, 1998 6:43 PM