Ricoh AP1400/AP2000 - Manual (Page 100)

Paper and Other Media
80
9
C Return the catches to their orig-
inal positions.
Important
❒ Make sure that the catches
return to their original posi-
tions securely. If they are not
locked securely, paper mis-
feeds might occur.
C
Adjust the paper size dial to
match the size and feed direction
of the paper in the paper tray.
Important
❒ If you want to use paper size
and feed direction that are not
indicated on the paper size dial,
set the dial to “
p”. In this case,
you should specify the paper
size using the operation panel.
⇒
P.125 “Making Printer Settings
with the Operation Panel”
D
Adjust the rear and side guides to
the paper size you want to load.
E
Load paper into the tray with the
print side up.
Important
❒ Make sure that the top of the
stack is not higher than the limit
mark inside the tray.
❒ Make sure the paper fits under
the rear guide.
F
While lifting the front side of the
tray, place the tray into the print-
er. Then slide it into the printer
TS3Y060E
4 A
TS3Y070E
TS3Y080E
TS3Y090E