Ricoh AP1400/AP2000 - Manual (Page 69)

49
7. Installing the Font Manager
Installing the Font Manager
Printing under a Windows system using PCL 6 or PCL 5e requires installation
of the Font Manager for your operating system. This section provides basic pro-
cedures for installing the Font Manager.
The actual procedure differs somewhat depending on your operating system.
Follow the right one of the procedures below.
Windows 95/98 - Installing the Font Manager
A
Insert the CD that comes with your printer in the CD-ROM drive.
B
Close all applications that are currently running.
C
Click [Start] on the task bar.
D
Click [Run] .
E
In the [Run] window, click [Browse] .
F
Select the CD-ROM Drive.
G
Open the folder called [FONTMAN] .
H
Select the file titled [SETUP.EXE] .
I
Click [Open] .
J
Click [OK] .
K
Follow the instructions on the screen.
Windows 3.1x - Installing the Font Manager
A
Insert the CD that comes with your printer in the CD-ROM drive.
B
Close all applications that are currently running.
C
From the [Program Manager] , select [Run] from the [File] menu.
D
In the [Run] window, click [Browse…] .
E
Select the CD-ROM Drive in the Drives list.