Ricoh AP1400/AP2000 - Manual (Page 141)

Cleaning the Printer
121
10
B
Pull out the plug from the socket.
Remove all the cables from the
printer.
C
Pull the paper tray out of the
printer.
D
Move the printer to the edge of a
stable table or desk.
Important
❒ Do not put the printer on an un-
stable or tilted surface.
❒ If the optional tray unit is
equipped with your printer, do
not move the printer and the
optional tray unit together as
they are not securely attached.
❒ When lifting the printer, make
sure that the optional tray unit
is not attached to the printer.
E
Pick the stopper inside the roller
with your fingers (
A), slide it to
the left, so that the paper feed
roller can be released (
B).
F
Clean the rubber part of the roller
with a soft damp cloth. After wip-
ing it with a damp cloth, wipe it
with a dry cloth to remove the wa-
ter.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
G
With the round part of the roller
up (
A), insert the roller into the
shaft until the roller clicks (
B).
H
Move the printer to the place
where it was installed. Insert the
TS4Y270E
TS4M030E
1
2
TS3M040E
1
2
TS3M050E