Ricoh AP1400/AP2000 - Manual (Page 325)

Setting Up LPR Printing
29
5
Setting Up LPR Printing
If the printer driver has not already been installed, please install it before con-
tinuing.
In the following instructions, some field or dialog names may vary depending
on the NT release pack in use.
Windows NT4.0
A
Click on the Windows Start Button and select Settings, and the Printers.
B
Right click on the appropriate printer and select Properties.
C
On the Ports tab, click on Add Port.
D
Double click on LPR Port in the list of available printer ports.
E
In the Name or address of host providing lpd: field, enter the IP address of
the NIB (that was assigned with BOOTPL32).
F
In the Name of printer or print queue on that server: field, enter PORT1 and
click on
[OK] .
G
Click on Close to close the Printer Ports dialog.
The NIB IP address is now displayed and currently selected on the list of
ports.
H
If the printer is to be shared, click on the Sharing tab, select Shared and en-
ter the Share name.
I
Click on [OK] when finished.