Ricoh AP1400/AP2000 - Manual (Page 110)

Paper and Other Media
90
9
C
Adjust the left side guide to the
paper width. The guide should be
against the paper stack.
Important
❒ Make sure the paper fits under
the side guides.
D
Specify the paper size and feed
direction using the operation
panel as follows.
A Press {
Menu
}.
The following message appears
on the panel display.
Main Menu: j
Job Control l
B Press {
Enter
}.
The following message appears
on the panel display.
Job Control: j
1.Paper Input l
C Press {
Enter
}.
The following message appears
on the panel display.
Paper Input: j
1.Tray Priorityl
D Press {T} twice.
The following message appears
on the panel display.
Paper Input: j
3.Paper Size l
E Press {
Enter
}.
The following message appears
on the panel display.
Paper Size: j
1.Bypass Tray l
F Press {
Enter
}.
G Select the paper size you have
set in the bypass tray using
{T}{U} keys.
H Press {
Enter
} to execute your
setting. Wait for a while.
I After the panel display chang-
es, press
{
On Line
}.
The panel display returns to the
ready condition as follows:
Ready
E
Start the print operation with
your computer.
Type 2 Printer: Loading Paper
in the Optional Paper Tray
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
Important
❒ If your printer is equipped with
the optional tray, do not pull out
more than one tray with paper at a
time. If you do, the printer might
tilt forward.
TS4Y140E