B prepare the envelope feeder, Graphic – Ricoh AP1400/AP2000 User Manual

Page 106

Advertising
background image

Paper and Other Media

86

9

firm which printer (Type 1 Printer
or Type 2 Printer) you have.

Important

❒ With the optional envelope feeder,

you can load up to 60 envelopes at
a time.

P.74 “Paper types and cau-

tions”

A

Pull the optional paper tray (tray
2) out until it stops. After that, lift
it slightly, then pull it out.

Note

❒ Keep the paper tray with paper

in a cool and dry place.

B

Prepare the envelope feeder.

C

Slide the side guides outwards
until it stops by pinching them.
Slide the rear guide backwards by
pinching it.

D

Push the bottom plate down until
it locks into place.

E

Load envelopes into the envelope
feeder, with the print side up and
the sides of the flaps on the right
as shown in the illustration.

Important

❒ Make sure that the envelope

flaps are securely folded down,
and that there is no air inside
the envelopes.

Note

❒ Make sure that the top of the

stack is not higher than the limit
mark on the side guides.

❒ Make sure that the envelopes fit

under the side guides.

❒ Do not press down on the stack

of envelopes with too much
force.

TS3Y150E

TS3Y320E

TS3Y330E

TS3Y341E

Advertising