Ricoh AP1400/AP2000 - Manual (Page 152)

Making Printer Settings with the Operation Panel
132
11
❖ ❖ ❖ ❖ System 1 /
2
Menu Description
Copies You can specify how many copies are printed.
1- 999
Note
❒ Default: 1
I/O Timeout You can specify for how many seconds your printer should
wait before ending a print job. If data from other ports often
appear in the middle of your print job, you should increase
the timeout value.
15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 sec-
onds
Note
❒ Default: 30 seconds
Energy Saver You can specify how any minutes or hours the printer wait
before switching to Energy Saver mode. Energy Saver
mode reduces electric power consumption.
Off, 15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours
Note
❒ Default: 30 minutes
❒ If there is an error in your printer, the printer will not
turn into the Energy Saver mode.
❒ When the printer switches to Energy Saver mode, the
Power indicator turns off, while the On Line indicator
stays on.