Type 1 printer: loading paper in the bypass tray, A open the bypass tray, Graphic – Ricoh AP1400/AP2000 User Manual
Page 101: If you load paper of a4 l, 8, C adjust the side guides to the paper width, Make sure the paper fits under the side guides, P.81 “type 1 printer: loading paper in, The bypass tray
Type 1 Printer: Loading Paper and Other Media
81
9
until it stops.
Type 1 Printer: Loading Paper
in the Bypass Tray
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
❒ If you set the custom sized paper,
you should specify the paper size
using the printer driver. Also, use
the operation panel to set the cus-
tom size setting.
A
Open the bypass tray.
Note
❒ If you load paper of A4
L, 8
1
/
2
"
×
11"
L(Letter) or larger, slide
out the bypass tray extender
(
A) and then flip it open (B).
B
Slide the side guides outwards,
and load paper until it stops with
the print side down.
C
Adjust the side guides to the pa-
per width.
Important
❒ Make sure the paper fits under
the side guides.
D
Specify the paper size and feed
direction using the operation
panel as follows.
TS3Y100E
TS3Y110E
1
2
TS3Y130E
TS3Y120E
TS3Y140E