Ricoh AP1400/AP2000 - Manual (Page 306)

NetWare ® Configuration
10
2
E
In the Add Queue to Printer screen in the Queue field you can see the
queue that you just created.
F
Select the new queue and click on [OK] .
The queue is added and you return to the Port 1 screen.
Add a New User or Group
Most of the fields will be configured automatically.
Fill in the following fields with the appropriate information.
⇒
Refer to online help for additional information about the fields on this screen.
A
In the Port 1 screen, click on [Add User] .
The “Add User/Groups” screen appears.
❖ ❖ ❖ ❖ Connection
This lists all of the file servers that you can connect to.
Select the appropriate connection.
❖ ❖ ❖ ❖ NDS Context
Specifies the NDS context to use when generating a list of users.
❖ ❖ ❖ ❖ Users/Groups
Lists the users and groups available on the currently selected connection.
Select the user/group that you want to add.
❖ ❖ ❖ ❖ Delay in seconds for first message
Indicates how long the NIB should wait before sending a notification mes-
sage that an error condition has been detected.
❖ ❖ ❖ ❖ Delay in seconds for repeat messages
Indicates how long the NIB should wait before sending a repeat notifica-
tion of an error condition.
Note
❒ The NIB supports notify function only in Bindery Mode.
B
Click on [OK] to apply the settings.
Return to the Port 1 screen.
The users/groups that you selected will be visible in the Users/Groups No-
tified by Printer field.
Configure the Notify Settings
Most of the fields will be configured automatically.
Fill in the following fields with the appropriate information.