Ricoh AP1400/AP2000 - Manual (Page 226)

Chapter 3 - 1
Chapter 3
Using the Management Access Program
or a Standard Web Browser
MAP has the following requirements:
Ÿ The Microsoft TCP/IP protocol stack, the Microsoft IPX protocol stack, or Novell
NetWare 32-bit IPX protocol stack must be installed on this PC.
Ÿ A web browser must be installed on this PC. Both Netscape Navigator and Microsoft
Internet Explorer (3.02 or later) are supported.
The Management Access Program (MAP) uses a Windows-based HTML viewer program
linked with a proprietary bi-directional IPX/IP channel program to allow access to the Network
Interface Board's HTML-based monitoring and maintenance capabilities. An IP Web Browser
also provides access to this capability directly. Either program allows you to:
Ÿ Configure your network protocols for the Network Interface Board.
Ÿ Reset the Network Interface Board remotely to either clear an error condition, or return
the print server to its factory default settings.
Ÿ Troubleshoot problems in the Network Interface Board.
Ÿ Enable or disable the status sheet printout.
Ÿ Access a context-sensitive help menu that fully explains how to use each Management
Access Program feature.
Ÿ Access the online help that explains how to use the many features of this program.
Note: Some functions provided with the Management Access Program or the Web
Browser require a password. The factory default password is "sysadm".