Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 10)


1 Intended Audience
This manual is intended for the following personnel, who must also have knowl-
edge of electrical systems (an electrical engineer or the equivalent).

Personnel in charge of installing FA systems.

Personnel in charge of designing FA systems.
 Personnel in charge of managing FA systems and facilities.
2 General Precautions
The user must operate the product according to the performance specifications described
in the operation manuals.
Before using the product under conditions which are not described in the manual or apply-
ing the product to nuclear control systems, railroad systems, aviation systems, vehicles,
combustion systems, medical equipment, amusement machines, safety equipment, and
other systems, machines, and equipment that may have a serious influence on lives and
property if used improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are sufficient for
the systems, machines, and equipment, and be sure to provide the systems, machines,
and equipment with double safety mechanisms.
his manual provides information for using the Programmable Terminal. Be sure to read this
manual before attempting to use the software and keep this manual close at hand for ref-
erence during operation.
WARNING It is extremely important that Programmable Terminals and related devices be
used for the specified purpose and under the specified conditions, especially in
applications that can directly or indirectly affect human life. You must consult
with your OMRON representative before applying Programmable Terminals to
the above mentioned applications.
WARNING Do not use input functions such as PT touch switches for applications where
danger to human life or serious damage is possible, or for emergency switch
applications.
3 Safety Precautions
Read these safety precautions carefully and make sure you understand them before using
the Programmable Terminal so that you can use it safely and correctly.
Safety Conventions and their Meanings: This operation manual uses the following con-
ventions and symbols to indicate cautions, warnings, and dangers in order to ensure safe
use of the PT. The cautions, warnings, and dangers shown here contain important informa-
tion related to safety. The instructions in these cautions, warnings, and dangers must be
observed. The conventions used and their meanings are presented below.
DANGER! Indicates information that, if not heeded, is likely to result in loss of life or seri-
ous injury.
WARNING Indicates information that, if not heeded, could possibly result in loss of life or
serious injury.
CAUTION Indicates information that, if not heeded, could result in relatively serious or minor
injury, damage to the product, or faulty operation.