Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 20)

  

Section 1-2
2-2-2 Principal Functions of NT600S
Functions Related to the Data Display
 Character display
Characters of various sizes can be displayed. Characters can flash or be highlighted.

Figure display
Straight lines, circles, and other graphic figures can be displayed.
 Memory data display
Contents of the character-string memory table and the numeral memory table can be dis-
played. The memory table contents can be changed from the PC/Host.
 Bar graph display
Bar graphs corresponding to the contents of the numeral table can be displayed.

Lamp display
Lamps which turn on or flash as controlled by the PC/Host can be displayed.
Functions Related to the Data Input

Input by the touch switch
Data can be input by simply touching the screen.
 Numeric setting function
The touch keys can be assigned with numeric
values so that the numeric values can be input
at the operation site and sent to the PC.
Other Functions
 Buzzer
A built-in buzzer can be used.

Communications with a PC/Host
The NT600S can be connected to a PC/Host to enable data to be received
and touch switch information to be sent by using the host link function, NT
link function, C200H direct communication function, or RS-232C.
 System function
The system setting and maintenance can be executed by using the Sys-
tem Menu on the screen.

Screen data creation
The screen data can be created by using support tools on the computer
and stored in the unit.