Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 70)

Caution

    $ - "& 
   
Section 2-7
3-7 Connecting to the PC with C200H Direct Communication
This is the procedure for connecting the NT600S to an OMRON PC by using the
C200H direct communication method.
3-7-1 Compatible PCs
Some models and series of OMRON PCs have the direct communication function
built in. Check the model and series of the PC to which the connection is to be
made, and the type of CPU unit installed before making the connections.
The PCs that can be connected to the NT600S by using C200H direct communica-
tion are listed below.
CPU Unit Model Name
C20H/C28H/C40H/C60H C



H
C200H-CPU01-E
C200H-CPU03-E
C200H-CPU11-E
C200H
C200H-CPU21-E
C200H
C200H-CPU23-E
C200H-CPU31-E
C200HS-CPU01-E
C200HS-CPU03-E
C200HS-CPU21-E
C200HS
C200HS-CPU23-E
C200HS
C200HS-CPU31-E
C200HS-CPU33-E
C200HE-CPU11-E
C200HE-CPU32-E C200HE
C200HE-CPU42-E
C200HG-CPU33-E
C200HG-CPU43-E
C200HG
C200HG-CPU53-E
C200HG
C200HG-CPU63-E
C200HX-CPU34-E
C200HX-CPU44-E
C200HX
C200HX-CPU54-E
C200HX
C200HX-CPU64-E
In a system where the user program operates according to the PC cycle time, the
system operation may not be constant because of cycle time fluctuations.
Consider this point when designing the system.