Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 117)

[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
[ I/O CHECK MENU ]
Quit
LED
Buzzer
Backlight
Touch Switch
LCD Display
Communication I/F
DIP-Switch
Reference


  .  
Section 3-9
Select “Maintenance Mode”.
Select “I/O Check”.
Select “Touch Switch”.
A panel of 8-row x 16-column touch switches, each switch sized 39 dots x 49dots
cm, will be displayed.
“EXIT” switch to exit the
touch switch check menu.
The touch switch is normal if it is
highlighted while it is pressed.

Press a touch switch on the screen. If the touch switch is highlighted while it is
pressed, the touch switch is normally functioning.

When the check is finished, press the “EXIT” touch switch. The I/O check menu
will be redisplayed.
If memory switch setting for the key press sound has been made for ON, the key
press sound will be made when a touch switch is pressed. The number of pressed
touch switch will not be notified to the PC/Host.