Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 144)

Reference
Reference

.
  
Section 4-4
Numerals Which can be Displayed
The power of expression of the screen can be increased by giving various attrib-
utes such as the enlarged or reverse display to the numerals of the numeral
memory table.
The numeral attributes can be set in the edit screen when creating the screen data
by using the support tool.
The following types of numerals can be displayed on the NT600S:

Digits of the whole numbers: 1 to 8 digits
 Digits of the decimal fraction: 0 to 7 digits
 Character sizes: Half, normal

Enlarged display: Double width, double height, x4, x9, x16, x64
The characters enlarged to the x4 scale or larg-
er are displayed with the outline automatically
smoothed. This function is called “smoothing”.

Sign display setting

Decimal/hexadecimal display setting

Zero suppress setting
Zero suppress setting
The numeral data are displayed in designated display areas as right-aligned. If the
number of digits of a numeral data is smaller than that of the display area, number
“0”s will be displayed at the vacant digits. These “0”s will not be displayed if the
zero suppress setting is made for “Yes”.