Omron NT-series Programmable Terminal V022-E3-1 User Manual
Page 261
Advertising
WARNING
.
Section 7-3
Replacing the Backlight
Switch off the power before replacing the backlight. Otherwise you could sustain
an electric shock.
Operation
1. Turn off the power to the NT600S and remove the lid of the CFL case, located
at the upper right part of the rear of the NT600S: remove the screw with a Phil-
ips head screwdriver, then open the CFL case lid.
CFL case lid
Screw securing CFL case lid
2. Disconnect the backlight connector from the NT600S.
Advertising