Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 120)

[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
[ I/O CHECK MENU ]
Quit
LED
Buzzer
Backlight
Touch Switch
LCD Display
Communication I/F
DIP-Switch
[ COMMUNICATION I/F CHECK MENU ]
Quit
Tool Transmit
RS-232C Transmit

  .  
Section 3-9
Select “Maintenance Mode”.
Select “I/O Check”.
Select “Communication I/F”.
Select “Tool Transmit” or
“RS-232C Transmit”.
(Select “Tool Transmit”)