Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 13)





Safety Precautions (continued)

Do not disassemble for repairs or modification, or the product may malfunc-
tion.

The disposal of the NT600S (and used backlights) may be regulated by na-
tional or local authorities. Dispose of them in accordance with the laws and
regulations of the relevant country and local authority.

Never short the + and -- terminals of the battery. Do not recharge, take apart,
deform, or discharge it into open flame. Attempting any of these will lead to
hazards such as fire, leakage of electrolyte, rupture, etc.

Depending on how the power is switched ON/OFF, the entire system may
stop. Follow the correct procedure when switching the power ON/OFF.
Otherwise the system may operate unpredictably.
 Always turn off the power at both the PC and PT before connecting the
C200H interface cable. Otherwise the system may operate unpredictably.
Switch off the power to the NT600S and PC before disconnecting/connecting
the cable.

Set so that there is no overlap between the PT status control area and PT
status notify area. Otherwise the system may operate unpredictably.

When transferring the data in units of screens, if there are changes in
memory table and/or direct connection, transfer such data along with the
screen data. Otherwise the system may operate unpredictably.