Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 125)

[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
[ DISPLAY HISTORY MENU ]
Quit
Time Order
Frequent Order

  .  
Section 3-9

Reading the Recorded Display History
Before starting to record the display history, initialize (clear) the display history
data memory, either by sending the display history data memory initialization com-
mand from the Host (page 76) or selecting “Screen Data Memory” initialization
menu in the Maintenance Mode (page 72).
If the memory becomes full of history data, the history data for new occurrences
cannot be recorded.
Display the recorded display history using the following menu operation starting
from the System Menu.
Select “Maintenance Mode”.
Select “History Display”.
Select either “Time Order” or
“Frequent Order”.