Omron NT-series Programmable Terminal V022-E3-1 - Manual (Page 318)



Revision History
NT-series
Programmable Terminal
Operation Manual
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No. V022-E3-1
Revision code
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
E1-1 5--1995 Original production
E1-2 9--1995  Additions relating to numeral input (numeral input using thumb wheel keys).
 Additions relating to operation for notification to the PC using touch switches (alternate/
set/reset).
 Additions relating to additional functions when performing numeral input (upper/lower
limit check, hexadecimal input).
 Additions relating to additional communication method (C200H direct communication).
E1-3 5--1997  Amendments relating to addition of the NT link (1:N) method communication function.
 Amendments relating to additions to safety notices and correction of errata.
 Amendments relating to addition of the Mitsubishi A computer link communication func-
tion, addition of an applicable PC (CPM1), additional explanations and correction of
errata.
E3-1 7--97 Some reformat required for printing. Cable wiring drawings corrected in Sec 2-6, pages 51
and 52.