Quantum Data 802BT - Manual (Page 30)

20 Chapter 1 Getting Started
Special key operations summary
The following table describes modes that can be enabled while the generator is running,
and the physical controls and comands for using the modes.
HDCP tester mode Enables HDCP testing. G, ACS Set: SROP 8192
Rst:
SROP 0 8192
Hot plug formats Auto-configures generator for-
mat knob list based on EDID in
response to hot plug. R, ACS Set: SROP 16384
Rst:
SROP 0 16384
DVI mode (disable
HDMI) Outputs DVI on HDMI connec-
tor. R, G Set: SROP 32768
Rst:
SROP 0 32768
Hot plug bypass Bypasses hot plug detection
and auto-configuration of the
generator. Step, R, ACS Set: SROP 65536
Rst:
SROP 0 65536
Special mode Function Physical control Command
Mode Function
Physical control
(hold 1st & press
2nd)
Command
Toggle analog/digital Outputs either digital or ana-
log. G, B AVST x; DVST x
Rotate video type Outputs either RGB, color dif-
ference, or monochrome. R, B
DDC-based auto-con-
figuration Auto-configures generator for-
mat knob list based on EDID. R, ACS
Toggle biLevel/triLevel Toggles between tri-level and
bi-level syncs for analog HDTV
formats with tri-level sync type. B, ACS TSPG x