Quantum Data 802BT - Manual (Page 731)

802BT/802R Video Test Generator User Guide 721
2722 Blanking pedestal out of range for NTSC TV signal
The generator hardware configuration does not support producing NTSC TV video outputs
that do not use a nominal blanking pedestal level (AVPS setting) of 7.5 IRE as required by
the NTSC specifications.
2741 Digital video signal type not supported
The generator hardware configuration does not support any type of digital video outputs.
2742 Invalid digital video signal type
The current firmware does not support the format’s digital video type selection (DVST
setting).
2743 Digital video polarity not positive
The generator hardware configuration and/or the firmware does not support digital video
formats having a logic low level for the active (lit) pixels.
2745 Can not have analog AND digital video
The generator hardware configuration does not support the simultaneous generation of
analog and digital video signals.
2747 Invalid analog video signal type
The current firmware for a given model generator does not support the video format’s
analog video type selection.
2748 Analog video signal type not supported
The generator hardware configuration does not support the video format’s analog video
type selection.
2760 Digital video not supported
The generator hardware configuration does not support the video format’s digital video
type selection.
2761 Digital video signal swing out of range
The value specified for the digital video signal swing is out of range.
2762 Digital video swing calibration out of range
The value specified for the digital video swing calibration is out of range.
2800 Pseudo-random noise seed value exceeds limit
The seed value for the pseudo-random noise analysis exceeds its maximum value.