Quantum Data 802BT - Manual (Page 721)

802BT/802R Video Test Generator User Guide 711
Error code descriptions
2000-2999 Format errors
2030 Number of fields per frame less than 1
A valid video format must have at least one (1) vertical filed of video per frame.
2040 Number of fields per frame greater than 2
The generator hardware configuration does not support interlaced video formats having
more than two (2) vertical fields per frame.
2041 Can not repeat field if progressive
Repeat field operation is only supported in interlaced video formats.
2050 Horizontal total too small
The video format’s total (active + blanked) number of pixel clock cycles per horizontal scan
line is below the minimum number supported by the generator hardware configuration.
2060 Horizontal total too large
The video format’s total (active + blanked) number of pixel clock cycles per horizontal scan
line is greater than the maximum number supported by the generator hardware
configuration.
2071 Pixel rate too high
The video format’s total (active + blanked) number of pixel clock cycles per horizontal scan
line multiplied by the horizontal scan rate exceeds the maximum pixel clock frequency
supported by the generator hardware configuration for the format’s video type.
2072 Pixel clock rate too high for pixel depth
The video format’s pixel depth combined with the total (active + blanked) number of pixel
clock cycles per horizontal scan line and horizontal scan rate exceeds the maximum
internal video data bit rate supported by the generator hardware configuration. The pixel
depth and/or total number of pixels per line need to be reduced in order to keep the current
horizontal scan rate.
2073 Pixel rate justification too high
The target pixel clock rate selected for justification of the video format exceeds the
generator hardware configuration.
2074 Pixel depth not supported
The video format’s pixel depth is not supported by the generator hardware configuration.