Quantum Data 802BT - Manual (Page 78)

68 Chapter 4 Working with Formats
3. Press the Step key to start the Format List editor.
The left side of the screen shows the current contents of the format list. The formats
appear in the order that they are selected by the Format knob during normal operation.
The right side of the screen shows the available formats.
4. Use the Format and Image knobs to select formats in the lists. Use these commands
to edit the format list.
5. Press the Exit (Step) key to save the edited list and exit the editor.
Key Function
Insert (DCS) Inserts the format selected from the list of available files at the cursor
position in the format list.
Delete (B) Remove the selected format from the format list.
Move (R) Moves the selected format in the format list to another position in the list.
To move the selected format, press Move, use the Format knob to spec-
ify the target position, and then press the Move key again.
Remove (DSS) Deletes the format selected in the list of available formats. This will
erase the entire contents of the file from non-volatile memory. Since this
operation can destroy a lot of programming work, an on-screen mes-
sage will ask you to confirm the removal of the file. Pressing the Yes or
OK key will erase the file. Pressing the No or Cancel key will abort the
removal operation.