EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 106)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
96
11.8 Playout Functions with Playlists
11.8.1 Rolling a Playlist
Rolling Action
After recalling a playlist, you will roll the playlist using the pre-defined speed of each clip.
Use the PLAY key to start rolling the playlist.
Playlist Speed
As soon as the lever is used to start the playback or during playback, the pre-set speed
for the current clip is cancelled and set by the lever position only. The playlist will return to
pre-set speed mode as soon as another clip with a pre-set speed is found.
Note
When using the
PLAY key to start the playlist, it is recommended to set the
lever at the top position (100%). If the lever is in low position and the operator
touches it by mistake while the playlist is rolling, the playlist could freeze on-air.
If the speed for a Super Motion clip is set to “UNK”, pressing the
PLAY key on that clip
will start the playback of the playlist at 33%.
11.8.2 Functions Available from the VGA Playlist Screen
To use the following commands, you must be in Playlist Edit or Playlist Playout mode:
• To enter the Playlist Edit mode, press the PLST key on the EVS Remote. The LCD
screen of the Remote displays the information about the previous, current and next
three clips of the playlist.
• To enter the Playlist Playout mode, press the PLST key again.
The following operations can be performed from the VGA playlist screen:
Criteria Description
Naming a playlist For more information, refer to the section 11.6.1 ‘How to Name
a Playlist from the VGA Playlist Bank Screen’, on page 94.
Naming the current clip For more information, refer to the section 11.6.3 'How to Name
the Current Element in the Loaded Playlist’, on page 94.
PLAY/pause Press ALT+P to start the playback / pause of the playlist from
the current position.
RECUE Press ALT+R to recue to the beginning of the playlist and
pause.