Remaining time, How to delete playlist elements from a playlist, How to move an element within a playlist – EVS MulticamLSM Version 11.00 Operating Manual User Manual
Page 114: 7 how to delete playlist elements from a playlist, 8 how to move an element within a playlist
Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
104
Remaining Time
The remaining time in playlists containing growing clips with only an IN point is displayed
as --:--:-- on the screens (OSD, VGA, Remote Panel screen) where this information is
shown.
11.10.7
How to Delete Playlist Elements from a Playlist
To delete a playlist element in a playlist using the Remote Panel, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the element that needs
to be deleted.
If the Browse mode is active, the first frame will appear on the display as each clip is
scrolled through.
2. Select
Delete from the Playlist Edit menu.
The selected element will be removed from the playlist. A confirmation message will
appear if the
Confirm Ins/Del clips parameter has been enabled in the Operational
Setup menu (p.3.2 F1).
11.10.8
How to Move an Element Within a Playlist
The action to move a playlist element is described in this section as it uses the
Delete
command.
To move a playlist element within a playlist using the Remote Panel, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the clip that needs to
be moved.
2. Select
Delete from the Playlist Edit menu. The clip is sent to the clipboard and loaded
on the
PRV channel.
3. Scroll to the location in the playlist where you want to insert the clip.
Remember that the position where the clip is inserted will depend on the value of the
Insert in playlist parameter in the Operational Setup menu (p3.1 F6), that is to say
before or after the selected playlist element.
4. Press
TAKE or INSERT on the Remote Panel to insert the clip from the clipboard at
the requested location.
The playlist element is inserted at the requested location.
If the playlist element has been trimmed before being moved, the element will be
reinserted in the new position with the new guardbands.
11.10.9
How to Change the Camera Angle of a Playlist
Element
You can change the camera angle of a playlist element if the material is still available in a
local or distant record train.
To change the camera angle of a playlist element, proceed as follows:
1. When you are in Playlist Edit mode, scroll within the playlist to the playlist element.
2. Press
MENU to access the secondary menu: