EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 62)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
52
9.3.3 The Function Bar
The second line displays the available functions. Each function can be called by the
corresponding F_ key of the keyboard, or by clicking with stylus & tablet on the
corresponding area on this line.
F1: Name
This function is used to name a clip. For more information on how to name a clip in the
VGA, refer to the section 9.3.8 ‘How to Name a Clip’, on page 58.
F2: Clip/Cam
This function toggles between CLIP mode and CAM mode.
• In CLIP mode, actions on a clip will use all available cameras for this clip.
• In CAM mode, actions on a clip will only use the selected camera for this clip.
Other functions such as Name, Delete, Copy, Set TC, >Archive depend on this mode
selection.
F3: Call
The operator can gain immediate access to a local or network clip by typing its ID
number.