EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 95)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
85
Keywords
They can be selected to be used as search criteria the same way they were selected to
be assigned to a clip, in LIST or NUMERIC mode. Up to three keywords can be selected
as search criteria. If all three keyword locations are used, some of them must be cleared
before selecting a new keyword. Press CLEAR+F1 / F2 / F3 to clear to corresponding
keyword location.
Ranking
A ranking can also be used as the only search criteria, or can be combined to the
keywords as an additional criterion. Press the B key several times to select the desired
ranking.
The
RESET key (SHIFT+A) can be used at any time to clear all three keyword locations
and reset the ranking to the lowest level.
Archive
This field allows selecting archive status for search criteria.
Parameter On the Remote
None (default) Archive
Clips not archived >Archive
Clips to be archived >Archive (blinking)
Clips archived >Archive
It is possible to include trains in the search. The B key allows to toggle between
CLIPS/CLIPS+REC/REC.
From Date / To Date
Selecting a From Date and To Date can be done using the SHIFT+C and SHIFT+D keys.
Pressing on any of those keys changes the display on the key to dd/mm/yy to indicate the
date format. The F keys are used to enter the date, the Clear key being the
< BACKSPACE>.
To search only for a specific date, use the same date twice in the From Date and To
Date fields.
Once a date is entered, pressing Clear SHIFT+C or Clear SHIFT+D reset the
FromDate
or ToDate to the default parameter (dd/mm/yy).
RESET
The RESET key: resets the default values of the search criteria (no from/to date) and set
the default TC to the TC of loaded on the PGM.
RETURN
The RETURN key (A) is used to exit the Search function without performing any search.