EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 146)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
136
Additional Loop Parameters
Additional parameters are available for the external loop:
• With the Cam A function (SHIFT+C), you can select the camera the PGM will be
recorded to for the external LOOP process. Press SHIFT+C until the desired camera
is selected.
• With the +2 fields function (SHIFT+D), you can select by how much the video coming
back to your record channel will be delayed. If you are using a DVE, it could introduce
a delay. This system is based on the assumption that audio and video are in sync
when they hit the record channel. The delay value cannot be negative.
Select SHIFT+D to highlight the delay value; the display allows you to add frames or
fields of delay to the delay value. Pressing either MENU or SHIFT+D will leave this
mode.