EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 89)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
79
Search Options
In addition to the Search Criteria available at the bottom of the screen, two search options
are accessible from the Function keys F2 and F4:
Consider Record Trains and / or Clips in the Search
This option allows the inclusion of record trains in the results in searches with timecode
criteria. Press F2 to toggle between CLIP / CLIP+REC / REC.
Consider Timecodes from the LTC and/or USER TC Tables in the Search
This option allows to take into account the timecodes from the LTC and/or the USER TC
tables in searches with timecode criteria. Press F4 to toggle between LTC / USER /
LTC+USER.
10.3.3 Clearing Keywords in the Search Criteria
How to Clear a Keyword with the Keyboard
Press < TAB> to move the arrow cursor to the lower area of the screen. Use the ←/→
arrows to move the cursor to the keyword to remove, and press CTRL+DEL. Press the
< TAB> key again to move the arrow cursor back to the keywords list.
How to Clear a Keyword with the Stylus
Click on the keyword to remove on the last line, the click on the CTRL+DEL:CLR KWD
area on the screen, or press CTRL+DEL.
How to Clear all Criteria at Once
Press ALT+DEL or click on ALT+DEL:CLR ALL: all keywords, timecode, Date From and
Date To fields assigned as search criteria will be removed, and the ranking will be reset to
the lowest level (“ -“).
When performing the search, only the clips matching all criteria defined by the operator
will be included in the search results. Press CTRL+S (or click on the corresponding area)
to search the local database, or press ALT+S (or click on the corresponding area) to
search the entire network database.