EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 117)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
107
4. Press COPY (A key) to select the copy option. The menu becomes:
5. To specify whether to copy the EDL with or without the clips, do one of the following:
• If you want to copy only the EDL without copying the elements contained in the
original playlist, press ENTER. The copy is done instantly since there is no
material to transfer.
• If you want to copy the EDL and the playlist elements themselves to your local
machine, press PLST+CLP ( B key). The display becomes:
6. To specify whether to perform a Short or Long copy, select the desired value
(SHORT or LONG) pressing the C key.
• SHORT mode (default): only the section of the elements between the Short IN
and Short OUT as defined in the playlist will be copied, increased by the duration
of the guardbands, as defined on the destination system.
• LONG mode: the entire original clips, including their guardbands, will be copied
on the destination system.
7. Once the various options have been decided, press ENTER to confirm the copy, or
MENU to cancel.
The F_ key of the destination playlist will flash until all clips have been copied. This
playlist can be recalled during that process for browsing, editing or playback. If some clips
have not yet been copied, the original network clip is used instead.
11.11.5 How to Copy a Playlist from the VGA Clip Screen
From the VGA screen, you can copy:
• the EDL of a playlist from the local server to the same server
• the EDL, with or without the playlist elements, from a distant server to the local
server.
How to Copy a Local Playlist
To copy a local playlist from the VGA Clip Screen, proceed as follows:
Copy Playlist 11/03 and all net. clips
to Playlist 13 ?
[Menu]: Cancel
[Enter]: Confirm
COPY PLST+CLP SHORT NEW PLST
Copy Playlist 11/03
to Playlist 13 ?
[Menu]: Cancel
[Enter]: Confirm
COPY PLST+CLP NEW PLST