Vdr panel - player window, How to load a record train, Vdr panel – player window – EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 75: 3 vdr panel - player window

Advertising
background image

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

65

Important
The control of a channel from the VDR Panel is concurrent to any other

controller that might be assigned to that channel: EVS Remote Panel or external

protocol. A command sent from the VDR Panel to a channel will overwrite

whatever the channel was doing at that time.


The name of the channel currently assigned to each window is displayed on the top of

each of them. To assign a new channel to this window, press ALT+H. A new window

appears on the other side to allow the selection of a new channel.


Use the

↑/↓ arrow keys to select the channel and press ENTER, or directly press

ALT+the number of the channel as highlighted in green. The Play channels already

assigned appear in grey and cannot be selected. Select “0 – Disable Window” if you don’t

want to assign any channel to the window. Depending whether a Play or Record channel

is assigned to the VDR Panel window, its content is automatically updated.

9.4.3

VDR Panel - Player Window


How to Load a Record Train

Press ALT+L to go in LIVE mode (or click on the LIVE function), then press

ALT+the

letter of the desired record train (A/B/C/D/E/F), or click on it. The letters corresponding to

the available record trains are highlighted in green, and the letter of the current record

train in red.

ID of the current

element (clip or train)

Current timecode

Name of the

current

element

List of available

camera angles

(green) and

selected camera

angle (red)

Advertising