EVS MulticamLSM Version 11.00 Operating Manual User Manual
Page 79
Advertising
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
69
5. The operator can also restripe the timecode of the IN point of the clip to a new value.
Press ALT+T, type the desired value and confirm with
ENTER. When creating the
clip, this timecode will replace the original timecode of the Short IN point.
6. Press ALT+S to save the clip(s). The operator still has the opportunity to rename the
clip during this operation. He can then save the clip to the current cursor location by
pressing
ENTER, or to the first available clip location on the current server by
pressing ALT+U.
Advertising