Other editing functions for playlists, How to trim clips into a playlist, How to sort the playlist elements by tc in – EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 120: How to merge playlists, 13 other editing functions for playlists, 1 how to trim clips into a playlist, 2 how to sort the playlist elements by tc in, 3 how to merge playlists

Advertising
background image

Issue

11.00.C

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

110

11.13

Other Editing Functions for Playlists

11.13.1

How to Trim Clips into a Playlist

Every playlist element can be trimmed independently of all other instances of the same

clip number.
To trim clips into a playlist, proceed as follows:
1. Browse to the desired element in the playlist.
2. Re-mark a new Short IN or Short OUT.

If the clip duration is too short, clear the IN or OUT point by selecting

CLEAR and

then set the new IN or OUT point at the desired position.

Note
Clearing restores the existing IN or OUT point to the end of the guardbands of

the clip.

11.13.2

How to Sort the Playlist Elements by TC IN

From the VGA, it is possible to sort (reorder) the playlist elements by TC IN. The sort is

done on the TC displayed in the TC IN column, whatever the type of TC displayed (User

TC or LTC).

Note
This operation will change the order of the playlist elements, and reset the

transitions to the default transitions defined on the Remote Panel.


To reorder the playlists elements by TC IN in a playlist, proceed as follows:
1. Open the playlist in the VGA Playlist screen.
2. Press the

TAB key until you highlight the Sort by TC IN field in the Playlist

management area at the bottom of the screen.

3. Press

ENTER to validate, and press ENTER a second time to confirm the operation.

The playlist elements are reordered by TC IN.
You can undo the operation using the

Undo command available in Playlist Edit mode on

the Remote Panel.

11.13.3

How to Merge Playlists

From the VGA, it is possible to merge two playlists by copying a playlist and pasting it to

an existing playlist. The copied playlist will be added at the end of the destination playlist.

Advertising